K.Y40102D Liquid level pressure transmitter
K.YB.40100M ultra-high-purity pressure transmitter
K.WB20088 Temperature transmitter
 
 


K.40100 Pressure Transmitter


Germany KADUN pressure transmitter series, using stainless steel isolation diaphragm as measurement, and through the computer automatic testing, in the process of laser trimming resistor wide temperature range of zero and sensitivity temperature compensating amplifying circuit is located in the stainless steel casing, which converts the sensor signal to the standard output signal.The product through the components of semi-finished products and finished products strictly test and aging. The product with its good reliability, wide adaptability, the flexibility and diversity of products, widely used 39 days petrochemical metallurgy military equipment Fire fighting equipment electrical machinery. Air conditioning heat pump system maritime industry process field pressure measurement and control.

Characteristics
316L stainless steel isolation diaphragm structure.
High accurancy, all stainless steel structure.
It is anti-seismic.
It is suitable for measurement of normal temperature and can work for a long time.
The structure is diversified and easy to install.
A wide range, can measure the absolute pressure, gage pressure and sealing gage pressure

Technical parameter rang


Range

-0.1…0-100Mpa

Accurancy

ܡ0.25%FS

Stability

0.2%/year

Overload

200%FS

Power Range

24V20%

Lead

Hirschmann

Protection Grade

IP65

Thread

M20*1.5

Temperature

-10-80

Temperature Drift

0.02%FS/

Storage Temperature

-40-85

Humidity

0-80%


Installation
mechanical connection can be through the pressure pipe fittings (DIN3582 male screw M20 * 1.5) (other size joint can be explained), directly on the hydraulic pipe road. In critical applications (such as a violent vibration or shock), pressure pipe fittings can be mechanical decoupling by micro hose

Overall dimension


Electrical interface
Hirschmann
Straight Line
Waterproof Line(IP68)
Size
Unit(mm)
Mode of connection:
2 lines show current output
Needle1: power+ Needle2: Current output
Red Line: Power+
Yellow Line: Current output
Red Line:power+
Yellow Line:Current output
Mode of connection:
3 lines show current output
Needle1:power+
Needle2:GND
Needle3:Voltage output

Red line:power+
Yellow line:GND
Blue Line:Voltage output
Red line:power+
Yellow line:GND
Blue line:Voltage output
Mode of connection:
4 lines show current output
Needle1:power+
Needle2:power-
Needle3:RS485A
RS485B
Red line:power+
Yellow line:;power-
Blue line:RS485A
Green line:RS485B
Red line:power+
Yellow line:;power-
Blue line:RS485A
Green line:RS485B